Click here to see all results
MCS 553L
 

MCS 553L

Made in Germany
Available at authorized resellers
Article Number: 471119

Digitally controlled System Unit

The MCS 553 L system microphone unit consists of a gooseneck microphone and a terminal board for the connection of loudspeaker, up to three buttons such as microphone, priority and clear button and two LEDs for microphone on (green) and request-to-talk (red). The customer can select the external operation buttons and LEDs. beyerdynamic recommends the use of a piezo button with integrated dual colour illuminated ring. The MCS 553 L can be used as a chairman’s microphone unit with three buttons or as a delegate microphone unit with one microphone button. The use depends upon the system configuration with the MCS Editor software. The ready-to-talk status of the microphone is indicated by a red illuminated ring. In the request-to-talk mode of the discussion system the microphone button is used to activate the request. Control voltages to power external LED indicators are available on the terminal board. These indicate microphone on and request to talk when released by the operator of PC or media control system.Dual colour or individual LED indicators may be used. If the microphone button is pressed again, the request to talk is cleared. If the MCS 553 L is used as a chairman's microphone unit, in addition to the microphone button it is possible to connect the priority and clear button. The chairman does not depend upon the limited number of open microphones (NOM). Using the priority button the chairman can intervene into the discussion and temporarily mute or clear the activated delegate microphone units depending upon the system configuration. Using the clear button all activated delegate microphone units are switched off. The installation via 4 buffer holes ensures high protection against vibration. With the cover ring the hole in the table is concealed perfectly, after the gooseneck microphone has been connected to the system unit under the table.

FEATURES

• Shielded fully metal housing for under table mounting
• Mounting holes mechanically decoupled from housing to minimise acoustic coupling
• Use as chairman or delegate microphone unit possible
• Gooseneck microphone with non-glare Nextel® coating and quick-plug connection through the table (supplied with pop screen)
• Illuminated ring around the gooseneck indicates the ready-to-talk status
• Cover ring for mounting through table at the gooseneck position (aluminium coloured anodized)
• Connection for up to 3 external buttons (microphone, priority and clear)
• Connection for external LEDs such as microphone on (green) and request-to-talk (red)
• DIP-switches to address and programme the microphone unit
• Fixed connecting cable (3 m long) with 15-pin Sub-D-plug
• 15-pin Sub-D-socket for system connecting cable
• Connection for loudspeaker

Contact

beyerdynamic Inc. USA
56 Central Ave.
Farmingdale, NY 11735

Phone +1 (631) 293-3200
E-mail
 

technical data

Net weight without packaging   1030 g


Spec Sheet

Downloads

Spec Sheet

User Manual


For more downloads please refer to our Service section.
 

Find distributors

Country
ZIP