Click here to see all results
DT 190
 
discontinued-product

DT 190

Made in Germany
Available at authorized resellers
Article Number: 423386

Professional headset with balanced microphone for on-air commentary requiring broadcast quality.

The DT 190 is a closed professional headset with a modular construction offering excellent ambient noise isolation. The powerful neodymium magnet system provides high-fidelity reproduction and a balanced sound. The headband and earphone cushioning systems have been carefully designed for maximum comfort and serviceability. The padded headband can adjusted to fit on every head.

â–² Powerful neodymium headphone system for excellent reproduction accuracy
â–² Excellent ambient noise attenuation
â–² High quality, dynamic noise cancelling hyper-cardioid microphone with wide frequency response
â–² Excellent intelligibility
â–² Capable of handling very high SPL
â–² Rugged, easy serviceable construction as all parts are replaceable
â–² Single-sided, detachable cable
â–² Closed headphone
â–² Softskin, circumaural ear pads
â–² Excellent comfort for long-term wearing

All DT 190 versions are supplied without connecting cable. Please order the appropriate connecting cable separately (see accessories).

Contact

Peter Carini
Sales Manager
Consumer Business Unit

beyerdynamic Inc. USA
56 Central Ave
Farmingdale, NY 11735

Office 631.293.3200 ext.17
Fax 631.293.3288
Mobile 516.848-3902

peter@beyerdynamic-usa.com

technical data

Transmission type   Wired
Headphone design (operating principle)   Closed
Headphone impedanceAlso known as nominal impedance. The impedance is the AC resistance of the coils of loudspeakers and headphones in ohms. Since impedance depends on the frequency, it is always specified at a frequency of one kilohertz.   250 ohms
Headphone frequency responseThe frequency response specifies the highest and lowest frequencies reproduced by the acoustic transducer of the headphones.   5 - 30.000 Hz
Nominal sound pressure levelThe acoustical level, the headphone transducer produces to an artificial ear (a measurement device, which simulates a human ear) with an input power of 1 mW (dB/mW @ 500 Hz).   97 dB
Polar patternThe polar pattern is the preferred pick-up direction of the microphone. According to the shape of the corresponding measurement plot, there are omni-directional, cardioid, super-cardioid or hyper-cardioid as well as figure-of-eight patterns. for microphone   Hypercardiod
Transducer typeThe transducer system is designed as a dynamic moving coil microphone, as a ribbon microphone or as a condenser microphone. for microphone   Dynamic - Hypercardioid
ConstructionSound coupling to the ear. A differentiation is made between supraaural headphones, circumaural headphones and in-ear headphones.   Circumaural (around the ear)
Cable & plug   Detachable cable – various connectors available
Net weight without packaging   368 g


Spec Sheet

accessories for DT 190

K 190.48 - 3 m
K 190.48 - 3 m
$59.46
Excl. tax, Excl. shipping
Connecting cable for DT 190 and DT 290 series with 2x 3.5mm stereo jack plugs.
K 190.48 - 3 m
K 190.41 - 1.5 m
K 190.41 - 1.5 m
$59.46
Excl. tax, Excl. shipping
Connecting cable for DT 190 and 290 series with 5 pin XLR male.
K 190.41 - 1.5 m
K 190.00 - 3 m
K 190.00 - 3 m
$38.05
Excl. tax, Excl. shipping
Connecting cable for DT 190- and DT 200-series HEADSETS with free ends
K 190.00 - 3 m
K 190.40 - 3,0 m
K 190.40 - 3,0 m
$68.97
Excl. tax, Excl. shipping

Connecting cable for DT 190- and DT 290 series with 3 pin XLR male and 6,35mm jack plug: K 190.40

K 190.40 - 3,0 m
K 190.26 - 1.5 m
K 190.26 - 1.5 m
$49.94
Excl. tax, Excl. shipping
Connecting cable for DT 290 series with 4-pin jack plug (3,5 mm), to connect to SONY cameras.
K 190.26 - 1.5 m
K 190.28 - 1.5 m
K 190.28 - 1.5 m
$55.89
Excl. tax, Excl. shipping
Connecting cable for DT 190 and DT 290 series with 4-pin XLR female.
K 190.28 - 1.5 m
K 190.40 - 1,5 m
K 190.40 - 1,5 m
$76.90
Excl. tax, Excl. shipping

Connecting cable for DT 190- and 290 series with 3 pin XLR male and 6,35mm jack plug: K 190.40 - 1.5 m

K 190.40 - 1,5 m
K 190.00 - 1.5 m
K 190.00 - 1.5 m
$34.48
Excl. tax, Excl. shipping
Connecting cable for DT 190 and DT 200 series HEADSETS with free ends
K 190.00 - 1.5 m
WK 190.00
WK 190.00
Coiled connecting cable for DT 190 and DT 290 series with free ends
WK 190.00

Downloads

Spec Sheet

User Manual

Info material


For more downloads please refer to our Service section.
 

Find distributors

Country
ZIP
 

product suggestions