Click here to see all results
 
WA-AMP2
 
new

WA-AMP2

Made in Germany
Available at authorized resellers
Article Number: 712035

Wideband antenna amplifier 470 - 1000 MHz, switchable gain 5, 10, 15 dB

The WA-AMP2 is an RF RF ("radio frequency") is used as a general abbreviation for radio signals, even though this is not correct in the strict sense, since this term only applies to the frequency range of 3 to 30 MHz. Current wireless systems operate mainly in the UHF (ultra-high frequency) range between 300 MHz and 3 GHz.amplifier that compensates signal loss in the antenna cable. The amplifier operates in the UHF range between 470 and 1,000 MHz and can be used with all wireless systems with an antenna voltage of 8 - 9 V such as the TG 1000 beyerdynamic series.

It is connected via BNC sockets. At the antenna input the WA-AMP2 also supplies a supply voltage of 8 V DC to power active antennas or for a series connection of several WA-AMP2. The WA-AMP2 has an internal current limitation of 150 mA. It is to be noted that the total sum of power consumption of the WA-AMP2 of approx. 75 mA and the externally supplied devices does not exceed the limit of the supplying unit (receiver or antenna splitter). As an alternative the WA-AMP2 can be supplied via an external power supply unit (not included in the delivery). In this way the maximum current of 150 mA for additional devices can be achieved in any case. In this case it is not necessary that the connected receiver/antenna splitter provides supply voltage.

In practice the WA-AMP2 amplifier is positioned as close as possible to the antenna. The setting of the amplification should be selected according to the type and length of the applied antenna cable. Only the minimum required amplification should be applied so that the receiver input is not overloaded.

 

FEATURES

  • Input/output BNC socket
  • Power on LED
  • Adjustable amplification (5, 10, 15 dB)
  • Supply via antenna cable or external power supply unit
  • Compatible with all receivers and antenna splitters with a supply voltage of 8 - 9 V DC
  • Alternative: external power supply (12 V, 350 mA)
  • Power supply at the input for the operation with active antennas
  • Simple mounting to microphone stands via integrated threaded adapters (3/8" or 5/8")
  • Alternative: Mounting via two holes (ø 4 mm)


TECHNICAL SPECIFICATIONS

 Frequency response . . . . . . . . . . . . . 470 – 1,000 MHz

RF connection . . . . . . . . . . . . . . . . . Input/output BNC socket

Wave impedance . . . . . . . . . . . . . . . 50 Ω

Input Intercept Point third order (IIP3) . . . . . . . . . . . . . . . . 22 dBm

Amplification switchable in 3 stages . . 5 dB, +10 dB, +15 dB

Supply via antenna cable . . . . . . . . . 8 - 9 V DC, 75 mA

Supply via external power supply unit12 V DC, 350 mA

Operating temperature range. . . . . . 0 °C to +45 °C

Dimensions (H x W x D) . . . . . . . . . . 108 x 98 x 30 mm

Weight. . . . . . . . . . . . . . . . . . . . . . . 160 g

Contact

Paul Fattrosso
Sales & Product Support Specialist
Pro Audio

beyerdynamic Inc. USA
56 Central Ave
Farmingdale, NY 11735

 

 

 

Office: 613-293-3200-11

Mobile: 845-220-6231

paul @beyerdynamic-usa .com

technical data

accessories for WA-AMP2

WA-ATDA
WA-ATDA

active directional wideband antenna

WA-ATDA
TG 1000 Dual Receiver
TG 1000 Dual Receiver
Digital UHF True Diversity Receiver, 319 MHz bandwidth
TG 1000 Dual Receiver
WA-ATO
WA-ATO
Passive omnidirectional wideband antenna
WA-ATO

Downloads

Spec Sheet


For more downloads please refer to our Service section.
 

Find distributors

Country
ZIP